
ADJ Products, LLC - www.adj.com - Encore Burst RGBW IP User Manual Page 16
Encore Burst RGBW IP
System Menu
4Ch / 6Ch / 7Ch / 8Ch / 11Ch
DMX Address
001-XXX
DMX CH Mode
Dim Modes
No DMX State
Hold Last / Blackout / Manual
Gamma
1.0 / 2.0 / 2.2 / 2.4 / 2.6 / 2.8
Dimming Curve Modes
Dimming Speed
DMX Lost Status
DMX Channel Mode
Selection
DMX Addressing
Standard / Stage / TV / Architectural / Theatre /
Stage2
Dim Speed: 0.1-0.9s ~ 1-10S
LED Refresh Rate
MENU
OPTIONS
DESCRIPTION
SUBMENU
Display
ON / OFF
Service
Pass Code = 50
Manual Control
Red: 000 - 255 / Green: 000 - 255 / Blue: 000 - 255 /
White: 000 - 255 / Strobe: 000 - 255 /
Dimmer: 000 - 255
Information
Fixture Life Time
Total LED Time
Fixture Temps
DMX Values
(3)
(See Note 3)
Software Version
X.X
ON / OFF
Backlight
Display Lock
Gamma Brightness
Effect Adjust - Pass Code = 50 - Red 000-255 /
Green 000 - 255 / Blue 000-255 / White 000-255
Backlight Control
Factory Settings
Calibration
LED Refresh Setting
Manual Control
Total Running Time
(Not Resettable)
Total Running Time
(Resettable)
Reset Total Running Time
Current Software Version
Current DMX Values
Current Temperature
Total LED On Running
Time (Not Resettable)
LED On Running Time
(Resettable)
Reset LED Running Time
Maximum Temperature
(1)
Reached (Resettable)
(See Note 1)
Reset Temperature
Display Control Lock
Maximum Temperature
(2)
Reached (Not Resettable)
(See Note 2)
Notes:
(1) Current Maximum Temperature - Maximum fixture temp. that has been recorded, before reset and after reset.
(2) Maximum Temperature - Overall maximum fixture temp. that has been recorded. (Not Resettable)
(3) DMX value options depend on the DMX Channel mode the fixture is set to.
900Hz / 1000Hz / 1100Hz / 1200Hz / 1300Hz /
1400Hz / 1500Hz / 2500Hz / 4000Hz / 5000Hz /
6000Hz
Current - XXX˚
Max Resettable - XXX˚
Max Not Resettable - XXX˚
Rst Temp Histor - Pass Code = 50
Power On Time - XXXXXX Hours
P-On Time-R - XXXXXX Hours
P-On Time Reset - Pass Code = 50
LED On Time - XXXXXX Hours
LED On Time-R - XXXXXX Hours
LED Time Reset - Pass Code = 50
Factory Restore - Pass Code = 11
Red / Green / Blue / White / Color Macros / Strobe /
Dimmer / Dimmer Fine / Dim Modes /
Refresh Rates / Gamma
Содержание ENCORE BURST RGBW IP
Страница 1: ...User Instructions ENCORE BURST RGBW IP...