background image

5

L I M I T E D   W A R R A N T Y   ( U S A   O N LY )

A.  ADJ Products, LLC hereby warrants, to the original purchaser, ADJ Products, LLC products to be free of 

manufacturing defects in material and workmanship for a prescribed period from the date of purchase (see 

specific warranty period on reverse). This warranty shall be valid only if the product is purchased within the 

United States of America, including possessions and territories. It is the owner’s responsibility to establish 

the date and place of purchase by acceptable evidence, at the time service is sought.

B.  For warranty service, you must obtain a Return Authorization number (RA#) before sending the product 

back—please contact ADJ Products, LLC Service Department at 800-322-6337. Send the product only to 

the ADJ Products, LLC factory. All shipping charges must be prepaid. If the requested repairs or service 

(including parts replacement) are within the terms of this warranty, ADJ Products, LLC will pay return ship-

ping charges only to a designated point within the United States. If the entire instrument is sent, it must be 

shipped in its original package and packaging material. No accessories should be shipped with the product. 

If any accessories are shipped with the product, ADJ Products, LLC shall incur no liability whatsoever for 

loss of or damage to any such accessories, nor for the safe return thereof.

C.  This warranty is void if the product serial number and/or labels are altered or removed; if the product is 

modified in any manner which ADJ Products, LLC concludes, after inspection, affects the reliability of the 

product; if the product has been repaired or serviced by anyone other than the ADJ Products, LLC factory 

unless prior written authorization was issued to purchaser by ADJ Products, LLC; if the product is dam-

aged because it was not properly maintained as set forth in the product instructions, guidelines and/or user 

manual.

D.  This is not a service contract, and this warranty does not include maintenance, cleaning, or periodic check-

up. During the period specified above, ADJ Products, LLC will replace defective parts at its expense with 

new or refurbished parts, and will absorb all expenses for warranty service and repair labor by reason of 

defects in material or workmanship. The sole responsibility of ADJ Products, LLC under this warranty shall 

be limited to the repair of the product, or replacement thereof, including parts, at the sole discretion of ADJ 

Products, LLC. All products covered by this warranty were manufactured after August 15, 2012, and bear 

identifying marks to that effect.

E.  ADJ Products, LLC reserves the right to make changes in design and/or improvements upon its products 

without any obligation to include these changes in any products theretofore manufactured.

F.  No warranty, whether expressed or implied, is given or made with respect to any accessory supplied with 

products described above. Except to the extent prohibited by applicable law, all implied warranties made by 

ADJ Products, LLC in connection with this product, including warranties of merchantability or fitness, are 

limited in duration to the warranty period set forth above. And all warranties, whether expressed or implied, 

including warranties of merchantability or fitness, are limited in duration to the warranty period set forth 

above. The consumer’s and/or dealer’s sole remedy shall be such repair or replacement as is expressly 

provided above; and under no circumstances shall ADJ Product, LLC be liable for any loss and/or damage, 

direct and/or consequential arising out of the use of, and/or inability to use this product.

G.  This warranty is the only written warranty applicable to ADJ Products, LLC products, and supersedes all 

prior warranties and written descriptions of warranty terms and conditions heretofore published.

MANUFACTURER’S LIMITED WARRANTY PERIODS:

•  Non-LED Lighting Products = 1-Year (365 Days) (Including Special Effect Lighting, Intelligent Lighting, 

UV lighting, Strobes, Fog Machines, Bubble Machines, Mirror Balls, Par Cans, Trussing, Lighting Stands, 

Power/Data Distribution, etc. excluding LED and lamps)

•  Laser Products = 1-Year (365 Days) (excluding laser diodes which have a 6-Month Limited Warranty)

•  LED Products = 2-Year (730 Days) (excluding batteries which have a 180 Day Limited Warranty)

•  NOTE: 2-Year (730 Days) Limited Warranty ONLY applies to product purchased within the United States. 

StarTec Series = 1-Year (365 Days) (excluding batteries which have a 180 Day Limited Warranty)

•  ADJ DMX Controllers = 2 Year (730 Days)

•  American Audio Products = 1 Year (365 Days)

Содержание ENC176



































Отзывы: