ADInstruments DSA2016TG Скачать руководство пользователя страница 59

Страница: 59 / 69

•

Turn on or off the autoset of input attenuation
Command format:

SENSe:POWer[:RF]:ATTenuation:AUTO OFF|ON|0|1
SENSe:POWer[:RF]:ATTenuation:AUTO?

Function description:

Turn on or off the autoset of input attenuation.
Query the autoset status of input attenuation.

Return format

Query and return the autoset on(1) or off(0) status of input attenuation.

•

Turn on or off the pre-amplifier
Command format:

SENSe:POWer[:RF]:GAIN:STATe OFF|ON|0|1
SENSe:POWer[:RF]:GAIN:STATe?

Function description:

Turn on or off the pre-amplifier
Query the status of the pre-amplifier

Return format

Query and return the on(1) or off(0) status of the pre-amplifier

•

Autoset(AUTO)
Command format:

SENSe:POWer:ATUNe

Function description:

Search signals in the full spectrum, and adjust the parameter of frequency and

amplitude to the best status.

•

Turn on or off the function of high sensitivity
Command format:

SENSe:HIGH:SENSitivity OFF|ON|0|1
SENSe:HIGH:SENSitivity?

Function description:

Turn on or off the function of high sensitivity.
Query the on/off status of high sensitivity.

Return format

Query and return the ON or OFF status as the format of characters.

5.8 INITiate Subsystem

5.8.1 Continuous Sweep and Single Sweep

Command format:

INITiate:CONTinuous OFF|ON|0|1
INITiate:CONTinuous?

Function description:

Содержание DSA2016TG






































































Результаты поиска

Содержание DSA2016TG

Отзывы:

ADInstruments DSA2016TG, Руководство пользователя, Страница: 59 / 69

Результаты поиска

Содержание DSA2016TG

Отзывы: