Adimec 188160 страница 52 Скачать руководство пользователя | Manualshive

Страница: 52 / 70

background image

OPERATING AND USER MANUAL Q-12 CoaXPress series

________________________________________________________________________________________________________________

_________________________________________________________________________________________

Adimec

52

7.16.2 BF_AutoLevelAdjust

| RW | E |

True

Before performing the calibration the camera will adjust the integration time
such that the video level will equal the level that is set in the
BF_calibrationVideoLevel feature.

False

The integration time will not be adjusted.

This feature is automatically updated if any of the following features is changed:
ExposureMode

NOTE:

This feature is only available when ExposureMode is set to Timed.

NOTE:

For a color camera, the color plane with highest amplitude is adjusted to the configured set point.

7.16.3 BF_CalibrationVideoLevel

| RW | E |

10 to 90,
Increment: 1

Set the target video level in a percentage of the full scale at which the
bright field calibration will take place.

7.16.4 BF_OutputImagesDuringCalibration

| RW | E |

True

The camera will output the images that are acquired during calibration. 1
for the Bright field calibration and up to 10 for the auto level adjustment
when BF_AutoLevelAdjust is enabled.

False

The camera does not output the images that are acquired during
calibration.

7.16.5 BF_Calibrate

| WO | E |

Command

Start the bright field calibration of the camera. Perform this operation with
uniform constant illumination on the camera. Flash strobe control can be
used as well. The calibrated correction will automatically be saved in the
non-volatile memory.

NOTE:

If the camera is running in a triggered mode, the illumination shall be adjusted by the user. The light

source may be either constant or flashed synchronously with the applied trigger.

NOTE:

Before performing a bright field calibration, first perform a dark field calibration.

«
...
50
51
52
53
54
...
»

Содержание 188160







































































Отзывы:

Нет отзывов

Похожие инструкции для 188160

Бренд: Canon Страницы: 76

Prima Super 130 Caption

Бренд: Canon Страницы: 2

Бренд: Canon Страницы: 196

Бренд: Canon Страницы: 2

Бренд: GE Страницы: 2

Бренд: Panasonic Страницы: 26

Бренд: Panasonic Страницы: 26

Бренд: Panasonic Страницы: 13

Бренд: Panasonic Страницы: 26

Бренд: Califone Страницы: 2

Бренд: Qomo Страницы: 25

Бренд: ZKTeco Страницы: 4

Бренд: Hama Страницы: 2

Бренд: CONCORD Страницы: 2

Бренд: Howell Technology Страницы: 9

Бренд: Gates Страницы: 53

SKYRAIDER DS287

Бренд: MallinCam Страницы: 205

Бренд: Targa Страницы: 386

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды