Adimec 188160 Скачать руководство пользователя страница 48 | Manualshive

Страница: 48 / 70

Adimec 188160 Скачать руководство пользователя страница 48

OPERATING AND USER MANUAL Q-12 CoaXPress series

________________________________________________________________________________________________________________

_________________________________________________________________________________________

Adimec

48

7.14.3 DefectPixelTestMode

| RW | E |

Off

Turn off the defect pixel test mode.

MarkDefectsWhiteOnVideo

Mark defects white on video, for use in a dark
environment.

MarkDefectsBlackOnVideo

Mark defects black on video, for use in a light
environment.

ShowDefectsAsWhiteOnBlackBackground

Generate a non-video test pattern that indicates the defect
pixels.

7.14.4 DefectPixelTotal

| RO | E |

Integer

Returns the total amount of pixels that will be corrected.

This feature is automatically updated if any of the following features is changed:
DefectPixelAdd, DefectPixelClearAll, DefectPixelRemove, DefectPixelRestore,
DefectPixelRestoreFactory

7.14.5 DefectPixelSelect

| RW | E |

0 to 999,
Increment: 1

Select the defect pixel index from which you want to know the coordinates.
The coordinates are displayed in the DefectPixelReadX and
DefectPixelReadY feature.

This feature is automatically updated if any of the following features is changed:
DefectPixelAdd, DefectPixelClearAll, DefectPixelRemove, DefectPixelRestoreFactory

7.14.6 DefectPixelReadX

| RO | E |

Integer

Returns the horizontal coordinate of the pixel selected by
DefectPixelSelect.

This feature is automatically updated if any of the following features is changed:
DefectPixelAdd,

DefectPixelClearAll, DefectPixelRemove, DefectPixelRestoreFactory, DefectPixelSelect

7.14.7 DefectPixelReadY

| RO | E |

Integer

Returns the vertical coordinate of the pixel selected by DefectPixelSelect.

This feature is automatically updated if any of the following features is changed:
DefectPixelAdd,

DefectPixelClearAll, DefectPixelRemove, DefectPixelRestoreFactory, DefectPixelSelect

7.14.8 DefectPixelWriteX

| RW | E |

0 to 4096
Increment: 1

Select the horizontal coordinate of a defect pixel that needs to be
corrected. Defect pixel coordinates x, y are referenced to the full sensor
image of 4096 x 3072 pixels, where (0, 0) is the top-left most image pixel.

«
...
46
47
48
49
50
...
»

Содержание 188160







































































Отзывы:

Нет отзывов