Adimec 188160 страница 26 Скачать руководство пользователя | Manualshive

Страница: 26 / 70

background image

OPERATING AND USER MANUAL Q-12 CoaXPress series

________________________________________________________________________________________________________________

_________________________________________________________________________________________

Adimec

26

7.4.3 DeviceUserID

| RW | B |

String

User-programmable device identifier. The string is directly written to non-
volatile memory. Up to 16 Characters can be used.

7.4.4 DeviceIndicatorMode

| RW | E |

Inactive

Turn off the status indicator LEDs.

Active

Turn on the status indicator LEDs.

ErrorStatus

Let the LEDs show the error status of the camera.

7.5

Image Format Control

The features in the image format control group influence the image format. You can set here a region of interest
(ROI) and the pixel format for example.

7.5.1 User Read Only Image Format Control features

Name

Visibility

Description

SensorWidth

E

Effective width of the sensor in pixels.

SensorHeight

E

Effective height of the sensor in pixels.

WidthMax

E

Maximum width (in pixels) of the image.

HeightMax

E

Maximum height (in pixels) of the image.

DeviceTapGeometry

E

Tap geometry to be used by streams of the Device.

Image1StreamID

G

Identification of stream 1.

7.5.2 Width

| RW | B |

ISSUE 1

32 to 4096,
Increment: 32

Set the width of the image in pixels.

ISSUE 2

32 to 4096,
Increment: 16

Set the width of the image in pixels.

ISSUE 2 NOTE:

When binning, the maximum range has to be divided by two.

ISSUE 2 NOTE:

The width has to be a multiple of 16 in both, binned and non binned mode. If a width is

selected that is dividable by 16 in non-binned mode but only by 8 in binned mode then when binning is
enabled the width will be clipped to the largest width that is dividable by 16.

Example:
When not binning, the width is set to 4080. This is dividable by 16. When 2x horizontal binning is
enabled, this width should be divided by two, resulting in 2040. However 2040 is not dividable by 16.
Therefore the width in binned mode is round down to 2032 which is dividable by 16. When returning to
no binning, the rounded width will be multiplied by two and become 4064.

ISSUE 2 NOTE:

This feature is automatically updated if any of the following features is changed:

BinningHorizontal

«
...
24
25
26
27
28
...
»

Содержание 188160







































































Отзывы:

Нет отзывов

Похожие инструкции для 188160

Бренд: Canon Страницы: 212

Бренд: Canon Страницы: 4

Бренд: Canon Страницы: 2

Бренд: Canon Страницы: 2

Бренд: Canon Страницы: 2

Бренд: Canon Страницы: 48

EF 100-400mm f/4.5-5.6L IS USM

Бренд: Canon Страницы: 9

EF-M 18-55mm f3.5-5.6 IS STM

Бренд: Canon Страницы: 12

Бренд: Canon Страницы: 28

Бренд: GE Страницы: 76

Бренд: GE Страницы: 78

Бренд: GE Страницы: 78

Бренд: GE Страницы: 106

Бренд: GE Страницы: 76

ARTCAM-990SWIR-TEC-CL

Бренд: ARTRAY Страницы: 17

Бренд: HuddleCamHD Страницы: 17

Бренд: Hama Страницы: 9

Бренд: Sandstrom Страницы: 16

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды