Operating Instructions
PANEL DESCRIPTIONS
Transmitter Panel
①
HDMI loop out port
②
EDID Switch
③
HDMI input port
④
IR Out port
⑤
Cat5e/6 output port
⑥
DC 12V port
Note
:
The transmitter of this product has the function of EDID copy, Dial to the left side
means copy loop EDID, and dial to the right side means copy remote EDID.
Receiver Panel
①
DIP switch
②
HDMI output port
③
IR In port
④
Cat5e/6 input port
Note
:Its receiver has 3 bit dialing switch.
From left to right, 1 is the high position, 3 is the low position, Corresponding to binary,
dial up to 0, dial down to 1, for the extension cord distance adjustment.Different network cable
lengths need to be set according to the following table.
000
1~15meters network cable distance
011
16~30meters network cable distance
101
31~40meters network cable distance
111
41~50meters network cable distance
4
