Adicos GSME-M4, Руководство по эксплуатации

Страница: 8 / 44

SAFETy InSTRUCTIOnS
6
ADICOS GSME 405-2010-003 EN52
2 Safety instructions
ADICOS GSME ensure operational safety assuming proper installation, commissioning, oper -
ation and maintenance. For this purpose, it is absolutely required to completely read, under -
stand and follow these instructions and the safety information contained.
WARNING!
Installation and operating errors can lead to fatal and severe
injuries and damage to the industrial system.
• Read and follow these instructions carefully!
2.1 Intended use
ADICOS GSME are point-type fire gas detectors for the detection of fire scenarios in the in -
dustrial environment. They are exclusively intended for operation within ADICOS systems. In
this context, the operating parameters described in Chap. 1, »About this manual« must be met.
Any deviating use requires prior consultation with the manufacturer.
Compliance with this manual as well as all applicable country-specific provisions is also part
of the intended use.
ADICOS GSME in their standard version may not be installed in explosive at -
mospheres ! Special GSME variants are available for operation within explosive
atmospheres.
2.2 Standards and regulations
The safety and accident prevention regulations applicable for the specific application must be
observed during detector installation, commissioning, test and maintenance.
The following standards and directives are of particular importance when handling fire alarm
systems:
Regulation Description
VDE 0100
Erection of Power Installations with Rated Voltages below 1000 V
VDE 0800
Telecommunications - General Concepts - Requirements and Tests for the
Safety of Facilities and Apparatus
VDE 0833
Alarm Systems for Fire
VDE 0845
Protection of Telecommunication Systems Against Lightning,
Electrostatic Discharges and Overvoltages From Electric Power
Installations - Measures Against Overvoltages
VdS 2095
Guidelines for Automatic Fire Detection and Fire Alarm Systems -
Planning and Installation
DIN 14675
Fire Detection and Fire Alarm Systems - Design and Operation