ADIC LTO 200D, Руководство пользователя

Страница: 51 / 65

Troubleshooting and Diagnostics 39
Display Error Code Log
Use this function to display the last 10 error codes, one at a time (the codes are ordered; the most recent is presented first and the oldest–
tenth–is presented last.)
To select the
Display Error Code Log function, perform the following steps:
1. Verify that the drive is in
Maintenance Mode
by observing that the
Status
LED is illuminated solid amber.
2. Press the Unload button once per second until the front panel indicators display the following:
Indicator State, Character, or Message
Status LED Amber, solid
Single-character display
9
LCD
Maint Mode: Select
Display Err Code Log
3. Press and hold the
Unload
button for two seconds to select
Display Error Code Log
. The front panel indicators display
the following:
Indicator State, Character, or Message
Status LED Amber, solid
Single-character display
9
, flashing
LCD
Display Err Code Log
0. Media Error
4. After you select this function:
Press the Unload button to view the most recent error code.
Press the Unload button again to view the successive error codes.
If you press the Unload button after the tenth error code is shown, the drive will exit this function as well as the
Maintenance Mode
function.
If there are no errors in the log, the front panel indicators display the following:
Indicator State, Character, or Message
Status LED Amber, solid
Single-character display
0
LCD
Maint Mode: Select
Exit Maint Mode
5. To exit this function and
Maintenance Mode
, press and hold the
Unload
button for two seconds.