ADIC LTO 200D, Руководство пользователя

Страница: 50 / 65

38 Troubleshooting and Diagnostics
4. Within 60 seconds, insert the FMR cartridge (or the drive will exit
Maintenance Mode
).
After you insert the cartridge, the front panel indicators display the following:
Indicator State, Character, or Message
Status LED Amber, solid
Single-character display
8
, flashing
LCD
Unmake FMR Tape
Tape Loading ====
while the drive loads the FMR tape, then erases the firmware on the tape,
then rewrites the header in the cartridge memory to change the cartridge to a
valid scratch data cartridge.
If the operation is successful, the front panel indicators display the following:
Indicator State, Character, or Message
Status
LED Amber, solid
Single-character display
0
, solid
LCD
Unmake FMR Tape
Completed!
followed by:
Cartridge Unloading
In Progress
followed by:
Ultrium Tape Drive
Drive Empty
The drive will then exit Maintenance Mode .
If the operation is not successful or the tape is already a valid scratch tape, the front panel indicators display the following:
Indicator State, Character, or Message
Status LED Amber, solid
Single-character display
7
, flashing
LCD
ERROR!
Media Error
To resolve the error, refer to Table 4-2 Error Codes, elsewhere in this chapter. To clear the error, cycle (remove, then
reapply) power to the LTO standalone.