ADI 4-Point PRO, Руководство по установке

Страница: 14 / 20

5
Installation Instructions 8.0
Width Adjustment 8.4
1. Remove fabric cover from back support.
2. On each side of the hardware, loosen the top and bottom nuts (as shown), using a 4mm
Allen Wrench and a 10mm wrench.
3. Adjust hardware inward or outward to achieve required mounting hardware width.
4. After final adjustments are complete, tighten all screws to the proper torque specification.
WARNING
Protect all backs from blunt forces that may cause damage
and/or breakage.
CAUTION
When positioning an ADI back, the interior portion of the back support
should be positioned to make a contact at the PSIS to provide optimal pelvic support
and trunk control
.