DTU2xx Data Logger Series
User Guide. r. 2.1 | 2021-11-10
Tel.: +420 538 890 720
2
e-mail: [email protected]
DTU2xx Data Loggers
User Guide (revision 2.1, November 10
th
, 2021)
This user guide was developed for persons responsible for mounting, configuration and technical maintenance
of the DTU2xx data logger series (hereinafter referred to as DTU or Data Logger). The guide contains
information about the intended purpose, design, technical parameters and operating principles of the DTU.
ADGT systems reserves the right, without any prior notice, to make changes to the operating manual related
to the improvements in hardware and software, as well as to eliminating misprints and inaccuracies.
Safety Instructions
CE WARNING:
In a residential environment this product may cause radio interference. In such
cases users may be required to take adequate measures.
WARNINGS!
Do not dispose electronic equipment as unsorted municipal waste. Please use a separate
collection facility or contact the supplier from which this instrument was purchased.
Do not disassemble the device unless you are qualified as service personnel.
AC Input voltage:100-240VAC, 230VAC, 50Hz
Connect the protective grounding conductor of the AC power cord to an earth ground, to avoid
electrical shock.
The equipment should not be serviced when powered up. Make sure to power down the
equipment before performing service activities.
Do not use or install this product near water to avoid fire or shock hazard.
Avoid exposing the equipment to rain or damp areas.
ADGT systems s.r.o
Planichkova, 442/3,
162 00, Prague 6, Prague, Czech Republic
The present document is the property of ADGT systems s.r.o.
Printing is authorized exclusively for private usage.
