Industrial
Electronic Devices
ADFweb.com S.r.l.
User Manual
M-Bus / M-Bus Wireless / MQTT
Document code: MN67931_ENG Revision 1.200 Page 29 of 49
S
ECTION
N
ODES
(
W
M-B
US NODES
):
In the field “
Manufacturer ID
” it is necessary to define
the Manufacturer ID of the wM-Bus node.
In the field “
Address
” it is necessary to define the ID of
the wM-Bus node.
If the field “
Version
” it is necessary to define the version
of the wM-Bus node.
In the field “
Device Type
” it is possible to define the
Type of the wM-Bus node.
The field “
Key Enable
” is used to decode the M-Bus
frame sent by the wM-Bus node if it uses encrypted
communication. In the following 16 fields, you have to
In the field “
Variables List
” it is necessary
to select
which type of variables definition to use. If is selected “By
Type” it is necessary to fill all fields, in the section
Variables, with the correct values; otherwise if “By
Position” is selected you can insert the progressive
number of the variable that you need (page 30 for more
information).
After that, pressing the “
ADD NODE
” button, a new node
appears in the left side of the window. In order to modify a
created node it is necessary to select the desired node,
change the wrong items and then press the “
MODIFY
NODE
” button.
Figure 5b: “M-Bus Network” window
