Industrial
Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO:
www.adfweb.com
Phone +39.0438.30.91.31
User Manual
DALI / Ethernet
Document code: MN67839_ENG Revision 1.001 Pagina 22 di 62
MENU BAR
S
ETUP
:
This section defines the connection’s parameters to the Ethernet side of the HD67839 converter.
By Pressing the “
Setup
” button from the menu bar of the DALI Console software, the “SETUP” window appears (Fig. 9).
The means of the fields for the “SETUP” window are:
In the field “
IP ADDRESS
” insert the IP address set inside the converter;
In the field “
DEVICE PORT
” insert the communication port used for the Ethernet communication with the converter (fixed to
‘10000’);
In the field “
CONSOLE PORT
” insert the communication port used for the Ethernet communication with the converter (defined with
SW67839);
In the fields “
SCI X Protocol
”, it is possible to select the Ethernet protocol to use. It is possible to use SCI 1 (from Tridonic), SCI 2
(from Tridonic) or SCI 3 (from ADFweb.com);
In the fields “
DALIX
”, it is possible to select the DALI version to use. It is possible to use DALI1 or DALI2;
If the option “
DISABLE AUTOMATIC SCAN
” is checked, the automatic scanning of DALI side is disabled. The DALI side is scanned
only on Ethernet command;
If the option “
AutoRefresh
” is checked, the list of DALI devices is refreshed automatically;
In the field “
NUM DEVICES
” the number of DALI devices connected to the converter is defined.
Figure 9: “Setup” window
