Industrial
Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO:
www.adfweb.com
Phone +39.0438.30.91.31
User Manual
DALI / Ethernet
Document code: MN67839_ENG Revision 1.001 Pagina 23 di 62
S
EARCH
…:
This section is used to scan the DALI network and assign automatically the ID to the DALI nodes connected to the converter.
It is possible to reprogram the entire DALI network deleting and reprogramming the ID to all DALI devices (“Full Search”) or set the ID only
to the DALI devices without it (“Partial Search”).
DALI
F
ILE
:
In this section, it is possible to save or load the DALI devices’ list.
T
EST
DALI
2:
In this section it is possible to test DALI 2 devices (like sensors). It is possible to send commands or see the events from them.
The communication will start by pressing “Connect” button.
Figure 10: “Test DALI 2” window
