Industrial
Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO:
www.adfweb.com
Phone +39.0438.30.91.31
User Manual
DALI / Ethernet
Document code: MN67839_ENG Revision 1.001 Pagina 16 di 62
SET COMMUNICATION:
This section define the fundamental communication parameters of Ethernet bus.
By Pressing the “
Set Communication
” button from the main window for SW67839 (Fig. 2) the
window “Set Communication” appears (Fig. 3).
The means of the fields for the “Ethernet” section are:
In the field “
IP ADDRESS
” the IP address of the converter is defined;
In the field “
SUBNET
Mask
” the SubNet Mask is defined;
In the field “
GATEWAY
” the default gateway of the Ethernet network is defined. This feature
can be enabled or disabled pressing the Check Box field. This feature is used for going out of
the net.
The means of the fields for the “DALI” section are:
In the field “
DALI Console
Port
” the UDP port used for Ethernet communication is defined;
If the field “
Switch off DALI on TimeOut
” is checked, the DALI line is switched off if any
Ethernet commands is received in the defined ”
TimeOut (ms)
”;
If the option “
Disable DALI Scan
” is checked, the automatic scanning of DALI side is
disabled. The DALI side is scanned only on Ethernet command;
If the option “
Enable DALI 2
” is checked, DALI 2 functions are enabled (normally used with
DALI sensors, actuators, exc.).
Figure 3: “Set Communication” window