Industrial
Electronic Devices
ADFweb.com S.r.l.
User Manual
Modbus TCP Slave / Modbus Master
Document code: MN67507_ENG Revision 2.400 Page 13 of 45
CHARACTERISTICS:
The HD67507 is a Modbus TCP Slave / Modbus Master – Converter.
It allows for the following characteristics:
Triple isolation between Serial - Power Supply, Serial - Ethernet, Power Supply - Ethernet.
Ethernet 10Base-T / 100Base-T, autosensing for Modbus TCP;
For Wi-Fi version, Access Point or Client mode ;
Mountable on 35mm Rail DIN;
Wide power supply input range: 8…24V AC or 12…35V DC;
Wide temperature range: -40°C / 85°C [-40°F / +185°F].
This HD67507-A1/B2 is able to manage a maximum of ten simultaneous connections from Ethernet side.
It can be used in two operative ways:
In the “
Routing Mode
” the command Modbus is forwarded on the serial line using the same requested addresses.
In the “
NAT Mode
” the device addresses and data are altered through a translation table of the addresses.
CONFIGURATION:
You need Compositor SW67507 software on your PC in order to perform the following:
Define the parameters of Modbus TCP line;
Define the parameters of Modbus Serial line;
Update the device.
