Adey MagnaClean Professional3 Sense, Установка и обслуживание

Страница: 9 / 20

9
Quick Set-up
Step 1.
Power on your filter.
Insert Battery LED OPERATION
When batteries are fitted for the first time or
replaced. All (GREEN) LEDs will illuminate for 2 seconds
then go off.
Step 2.
Connect your Filter to the Wi-Fi network (Note: Use only in conjunction with the ADEY Sense App).
Initiate Connection Mode LED OPERATION
Press and hold Check Button for 6 seconds,
this will initiate “Connection Mode”. Connection
Mode will last for 2 minutes.
All (GREEN) LEDs will flash twice as soon as
Connection Mode is initiated.
1.
2.
Flash Twice
Step 3.
Install filter onto heating system.
Step 4.
Reset the filter after fitting to the heating system (and after every service).
Filter Reset LED OPERATION
Press and hold Reset Button for 6 seconds, will
reset unit to a clean filter status.
All (GREEN) LEDs will illuminate.
LEDs will begin counting down while “Filter
Reset” is applied (right to left).
1.
2.
3.
4.