-
4
-
INSTALLATION INSTRUCTIONS
Before putting your service cellar into service
● Remove all inner and outer packaging components.
● Check that none of the following parts are missing:
- 3 removable shelves
- 1 operating manual
● Before connecting your device to a power supply,
allow it to stand upright for about 2 hours. This
reduces the risk of malfunction of the refrigeration
system due to handling during transport.
● Clean the inner surfaces of the unit with a soft cloth
and warm water.
● Place your unit on a floor strong enough to support
the weight of the fully filled unit.
● Make sure the unit is level by adjusting the front feet
underneath the unit. Make sure that the cellar rests
on its feet in a stable manner.
● Install the appliance away from direct sunlight and
heat sources (radiator, hot plate, etc.). Direct sunlight
can damage the unit’s coating and heat can increase
its power consumption. If the ambient temperature is
extremely cold or hot, this may prevent the unit from
operating properly.
● The unit is not designed to be installed in a basement
or cellar.
● This unit is designed exclusively for indoor use.
Caution: Make sure that the unit is kept away from any
substance that may cause combustion.
● Check that the water tank is in place before
connecting the unit.
Содержание CW-52FD
Страница 1: ...U S E R S M A N A U L E N CW 70FD Service Cellar CW 52FD ...
Страница 16: ...14 ...