ARF868 Radio Modems - User guide version V1.8.1
10
Page
of 26
1.8. Interfaccia SAV
Sul lato posteriore il modem è dotato di due pulsanti (1 e 2) che consentono il ritorno a delle regolazioni di base in caso di diagnostica SAV. La
spia luminosa bicolore situata sul lato anteriore completa questa interfaccia uomo-macchina.
Funzione
Bottone
Sequenza
Azione
Resettaggio
del modem
BP2
Premere BP2, quindi
rilasciare
Una pressione su BP2 permette di effettuare un resettaggio
del modem. L’apparecchio si riavvierà quindi secondo i
parametri della memoria non volatile, così come sono stati
configurati quando è stato impartito l’ultimo comando
AT&W (V. § 5 Modalità di regolazione).
Ripristino dei
parametri
di collega-
mento seriale
predefiniti in
FABBRICA
BP1
Lunga pressione su
BP1 superiore a 3
secondi
Una pressione prolungata di BP1 (> 3 s) consente di forzare
i parametri di collegamento seriale a: RS232, 9.600 baud,
8 bit, assenza di parità, assenza di controllo di flusso. A
conferma di questa azione la spia verde lampeggerà tre
volte.
Forzatura dei
parametri di
collegamento
seriale
BP1
Breve pressione su
BP1 inferiore a 3
secondi
Una pressione breve su PB1 (< 3 s) permette il ripristino dei
parametri di collegamento seriale predefiniti (rilevamento
automatico dell’interfaccia, Autobaud, data 8 bit, assenza di
parità, assenza di controllo di flusso). A conferma di questa
azione la spia verde lampeggerà tre volte.
Ingresso in
modalità di
comando
BP2 e BP1
1
Premere e tenere
premuto BP2
2
Premere e tenere pre-
muto BP1
Tenendo premuto BP1 (<3s) dopo aver rilasciato BP2 trig-
ger ingresso nella modalità di comando. Questa azione sarà
confermato da 3 lampeggi della spia rossa.
3
Rilasciare BP2
4
Tenere BP1 meno di
3 sec poi rilasciare
Riavvio del
modem con
i parametri
predefiniti
BP2 e BP1
1
Premere e tenere
premuto BP2
2
Premere e tenere pre-
muto BP1
Mantenere la pressione sul pulsante BP1 (>3 s) dopo
averla rilasciata sul pulsante BP2 permette di accedere alla
modalità “Regolazione”. A conferma di questa azione la
spia rossa lampeggerà tre volte.
3
Rilasciare BP2
4
Tenere BP1 più di 3
sec poi rilasciare
1.9. Installazione meccanica - l’ottimizzazione delle prestazioni
1.9.1 Ingombro
135mm
75mm
35mm