A
RF37
User Guide
Ref. 915MHz - 08-10-V2-psn
p 13
Procedure
Make sure that the following requirements are met before starting the
procedure :
y
All the devices must use the same table.
y
Only one device has the identifier 01.
N
OTE
On device 01 : To leave without saving. Press .
On the other devices : To leave without saving if the device does not
return
**DONE**
, press or.
Operations
on device 01
5. When the encryption
procedure has been validated on
all other devices, press
OK
to
end the procedure.
Operations
on the other devices
4. When a device has received
the encryption key from
device 01, it indicates encryption
**DONE**
. Press
OK
to
validate.
1. On all the devices, press for 2 seconds to access the
Device
setting
menu.
2. On
all the devices, press 3 times to access the encryption.
3. On all the devices, press
OK
to proceed
