adept technology SmartVision EX, Руководство пользователя

Страница: 44 / 74

Installing PCIe Cards
Adept SmartVision EX User’s Guide, Rev B 43
Output Signals
The sixteen digital outputs (1 - 16) share a common, low side (sinking) driver IC. The driver is
designed to supply any kind of load with one side connected to 10 to 30 VDC. The driver does not
include short-circuit protection and the user must take care to prevent shorts. An overload may
damage the driver circuit. Internal “fly-wheel” diodes are included for driving inductive loads.
The VDD power pin must be connected when driving inductive loads.
The outputs are accessed through a direct connection to the 50-pin connector, or through the
optional terminal block.
Output Specifications
Typical Output Wiring Example
Figure 5-4. Typical User Wiring for Output Signals
5.6 Installing PCIe Cards
The Adept SmartVision EX provides two expansion slots for PCIe cards. This section gives
instructions for installing a PCIe card.
1. Remove the top cover of the Adept SmartVision EX.
2. Unplug the internal 24 V plug.
This makes installation of the PCIe cards easier.
Table 5-3. I/O Card Output Specifications
Parameter Value
Power supply voltage range 10 to 30 VDC
Operational current range, per
channel I
out
≤
62.5 mA, all channels active
I
out
≤
500 mA, one channel active
Adept-Supplied Equipment User-Supplied Equipment
Outputs 1 - 16
Typical User Loads
VDD
12
Output 1
11
Output 2
10
Output 3
33
Output 14
30
Output 15
31
Output 16
Output Gnd
Load
25, 50
Load
Load
Wiring
Terminal
Block
+
-
10 - 30 VDC
1, 26
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com