adept technology eMB-60R Скачать руководство пользователя страница 90

Страница: 90 / 100

Chapter 8: IP-54/65 Option

Adept Viper s650/s850 Robot with MB-60R/eMB-60R User’s Guide, Rev F

Page 90 of 100

8.2 Differences from the Standard Robot Model

The installation, operation, and specifications of the IP-54/65 robot are the same as the stand-
ard robot, except for issues noted in this section.

Installation Environment

The IP-54/65 robot should not be installed in any environment where:

there are any flammable gases or liquids,

there are any acidic, alkaline, or other corrosive gases,

there are any large-sized inverters, high output/high frequency transmitters, large con-
tactors, welders, or other sources of electrical noise,

it may likely be submerged in fluid,

there is sulfuric cutting or grinding oil mist.

NOTE

: Any machining oil used around the robot must be compatible with NBR

(nitrile) and a polyurethane resin paint.

Robot Connector Panel

For the IP-54/65 robot, the robot connector panel is different than the standard robot. The panel
is shown in the following figure.

Figure 8-2. IP-54/65 Robot Connector Panel

NOTE

: On the IP-54/65 robot, the CN20 and CN21 connectors are IP-65 rated. Also,

the robot cable has a splash-proof connector on the robot end.

NOTE

: The mating connector sets for CN20 and CN21 are different for IP-54/65 and

Cleanroom robots. See Cleanroom Option on page 93.

NOTE

: For IP-54/65 compliance, keep the factory-installed plugs over I/O con-

nectors in place.

Содержание eMB-60R





































































































Результаты поиска

Содержание eMB-60R

Отзывы:

Похожие инструкции для eMB-60R

Бренды по названию

Популярные бренды

adept technology eMB-60R, Руководство пользователя

Результаты поиска

Содержание eMB-60R

Отзывы:

Похожие инструкции для eMB-60R

Бренды по названию

Популярные бренды