adept technology eMB-60R Скачать руководство пользователя страница 78

Страница: 78 / 100

Chapter 6: Maintenance

Adept Viper s650/s850 Robot with MB-60R/eMB-60R User’s Guide, Rev F

Page 78 of 100

Prerequisites

The robot must be set up and functional.

The robot must use eMB-60R amplifiers.

The MB-60R amplifiers do not support these hardware functions, and these wizards
will not run.

A PC with Adept ACE software version 3.3.2.10 or later must be connected to the eMB-
60R.

The Front Panel keyswitch must be in Auto mode.

Figure 6-7. Adept Front Panel

An Adept pendant is required for the Teach Restrict verification.

No E-Stops can be activated.

For Configuration (E-Stop and Teach Restrict), the eAIB Commissioning Jumper must be
plugged into the XBELTIO jack on the eMB-60R.

NOTE

: This is the only time that this jumper will be used. It is part number

11901-000, and must be removed for Verification and normal operation.

Figure 6-8. eAIB Commissioning Jumper

Содержание eMB-60R





































































































Результаты поиска

Содержание eMB-60R

Отзывы:

Похожие инструкции для eMB-60R

Бренды по названию

Популярные бренды

adept technology eMB-60R, Руководство пользователя

Результаты поиска

Содержание eMB-60R

Отзывы:

Похожие инструкции для eMB-60R

Бренды по названию

Популярные бренды