Adept Audio IW62, Руководство по установке, Страница: 5 / 12

5
In-Wall Speaker Installation Manual
Speaker placement
IW62 Speaker
The IW62 can go be mounted practically anywhere in a wall, provided the existing infrastructure (vents, ducts, electrical,
joists, pipes, etc.) does not interfere with the speaker placement. If you’re running the IW62s in mono, simply position
them at a distance that provides adequate coverage of the space, typically with the speakers 10-15 feet apart. If you’re
running them in stereo, you may wish to install pairs of speakers with each speaker in the pair equal distant from where
people will most likely sit, and the speakers spaced about 10 feet apart.
IWLCR56 and IWLCR66 Speakers
In-wall LCR speakers need to be positioned near the screen. Typically the left and right front speakers will be oriented
vertically and installed 6 inches to 3 feet to either side of the screen. The center speaker is typically oriented horizontally,
and mounted to the middle of the screen, 6 inches to 1 foot below or above the screen. In a 5.1 or 7.1 surround sound
system, you can use whatever speakers you like: the IWLCR56 or IWLCR66 in-wall LCRs, the IW62 standard in-wall, or any
Adept Audio ceiling speakers.
TV
L
Listening Area
Figure 1
The speaker layout showing In-wall LCR speakers for front left, center and
right channels, and in wall for left and right surround channels. The further
you spread the front left and right speakers apart, the more spacious (but
less focused) the sound will be.
C
R
LS
RS