ADEO Services YT6201-13, Сборка, использование, руководство по обслуживанию

Страница: 42 / 49

EN
41
SAFETY INSTRUCTIONS
11.Follow the maintenance and repair
instructions for this product. Never
carry out any modifications to
the product. Information about
maintenance and repair is provided
in this user manual.
12.If the power cord is damaged,
it must be replaced by the
manufacturer, its service agent or
similarly qualified people in order
to avoid a hazard.
13.Switch-off the machine before
attaching or removing the bag.
Emergency
Familiarize yourself with the use
of this product by means of this
instruction manual. Memorize the
safety directions and follow them to
the letter. This will help to prevent risks
and hazards.
1. Always be alert when using this
product, so that you can recognize
and handle risks early. Fast
intervention can prevent serious
injury and damage to property.
2. Switch off and disconnect from
the power supply if there is any
malfunction. Have the product
checked by a qualified specialist
and repaired, if necessary, before
you put it into operation again.
Residual risks
Even if you are operating this product
in accordance with all the safety
requirements, potential risks of injury
and damage remain. The following
dangers can arise in connection
with the structure and design of this
product:
1. Health defects resulting from
vibration emission if the product
is being used over long periods of
time or not adequately managed
and properly maintained.
2. Injuries and damage to property
due to broken accessories or the
sudden impact of hidden objects
during use.
3. Danger of injury and property
damage caused by flying objects.
WARNING! This product produces
an electromagnetic field during
operation! This field may under some
circumstances interfere with active or
passive medical implants!
To reduce the risk of serious or fatal
injury, we recommend persons with
medical implants to consult their
doctor and the medical implant
manufacturer before operating this
product!
In the event of accident or breakdown,
please release the trigger to stop the
machine, and disconnect the power
supply for checking.