ADEO Services YT6201-13, Сборка, использование, руководство по обслуживанию

Страница: 38 / 49

EN
37
SAFETY INSTRUCTIONS
loose clothing or jewelry. Keep
your hair, clothing and gloves
away from moving parts. Loose
clothes, jewelry or long hair can be
caught in moving parts.
7. If devices are provided for the
connection of dust extraction
and collection facilities,
ensure these are connected
and properly used.
Use of dust
collection can reduce dust-related
hazards.
Power tool use and care
1. Do not force the power tool. Use
the correct power tool for your
application.
The correct power tool
will do the job better and safer at the
rate for which it was designed.
2. Do not use the power tool if
the switch does not turn it on
and off.
Any power tool that cannot
be controlled with the switch is
dangerous and must be repaired.
3. Disconnect the plug from
the power source and/ or
the battery pack from the
power tool before making
any adjustments, changing
accessories, or storing power
tools. Such preventive safety
measures reduce the risk of starting
the power tool accidentally.
4. Store idle power tools out of
the reach of children and do
not allow persons unfamiliar
with the power tool or these
instructions to operate the
power tool. Power tools are
dangerous in the hands of untrained
users.
5. Maintain power tools. Check
for misalignment or binding
of moving parts, breakage of
parts and any other condition
that may affect the power
tool’s operation. If damaged,
have the power tool repaired
before use.
Many accidents are
caused by poorly maintained power
tools.
6. Keep cutting tools sharp and
clean.
Properly maintained cutting
tools with sharp cutting edges are
less likely to bind and are easier to
control.
7. Use the power tool, accessories
and tool bits etc. in accordance
with these instructions, taking
into account the working
conditions and the work to be
performed.
Use of the power tool
for operations different from those
intended could result in a hazardous
situation.
Service
1. Have your power tools
serviced by a qualified repair
person using only identical
replacement parts. This will
ensure that safety of the power tool