12
EN
TECHNICAL DATA
NOTE:
-The declared vibration total value and the declared noise emission values have been measured in
accordance with a standard test method and may be used for comparing one tool with another;
-The declared vibration total value and the declared noise emission values may also be used in a
preliminary assessment of exposure.
WARNING:
-The vibration and noise emissions during actual use of the power tool can differ from the declared
values depending on the ways in which the tool is used especially what kind of work piece is
processed;
-To avoid vibration and noise emission:
-wear hearing protection
-shorten trigger time
-wear anti-vibration gloves
BEFORE USE
DANGER! Risk of injury due to electric shock.
Warning! Do not plug in before installation is fully completed!
ASSEMBLY AND ADJUSTMENT
Attaching
•Align the stirrer with the paddle. Screw the stirrer clockwise onto the lower end.
•Lock the welded nut of the shaft with one mounting spanner and secure the stirrer clockwise with
the other gripping the welded nut.
•Align the shaft with the paddle. Screw the shaft end with welded nut clockwise into the socket.
•Lock the socket with one mounting spanner and secure the shaft clockwise with another mounting
spanner gripping the welded nut.
Removing/Replacing
•Lock the socket with one mounting spanner and loosen the paddle anticlockwise with another
mounting spanner gripping the welded nut.
•Loosen the welded nut anticlockwise and remove the paddle from the socket.
