15
EN
TROUBLE SHOOTING
Problems
Probable causes
Corrective actions
Product does not
start
Not connected to power supply
Power cord or plug is defective
Other electrical defect to the product
Connect to power supply
Connect to power supply
Check by a specialist electrician
Product does not
reach full power
Unsatisfactory
result
DANGER! Risk of injury due to electric shock.
Warning! Before any trouble shooting, switch off the tool and
remove the plug from the socket.
Extension cord not suitable for
operation with this product
Use a proper extension cord
Power source (e.g.generator) has too
low voltage
Connect to another power source
Air vents are blocked Clean the air vents
Stirrer is worn
Replace with new one
Replace with new one
Use proper stirrer
