ADENDORFF ZX6350G, Руководство по эксплуатации

Страница: 18 / 66

,,-
Installation
ZERO
ZERO
...-,
I <.
.-
' ; _ •: : : : - =-" .f====\_-'
114
Adjust the level of the machine to make sure the allowrance is under
0. 0411000mm in the across and horizontal direction after fixing the ma­
chine on the base by four bolts. If necessary pads under the base.
Trial
Run
Before trial tun. Please carefully clean the anti - rust oil on the every
part of the machine. But the metal tools and other tools which can hurt the
parts surlace are forbiden. Then coat a thin l
ag
er oil on the outer surlace.
Lubricate the sliding and rotating part before trial run. Pour engine oil
into the Gear Box and the Power Feed. Till indicating through the point then
do a overall check.
Bofore putting the power, examine if the power parameters is consisent
with the indicated parameters on the machine's data plate and at the same
time the round direction of the spindle is all right. During the trial run , first
run the machine unloaded at the lowest speed for around 30 min's then in­
crease the speed step by step and mean while inspect if the handwheel or
handle operates easily or reliably etc.
Notice: Must loosen the tighten handle before move the moving part.
-17-