5
ENGLISH
CONTROLS AND FUNCTIONS
S
[FRONT]
1
3
2
4 5
6
7
8
9 10 11 12 13 14 15
16
18 19
17
DISPLAY (See page 7)
1. RESET BUTTONS
Press these buttons at the same time to clear all
(microprocessor) functions.
Press the “S” button to reset the system. (This does
not erase the stored information.)
2. CASSETTE COMPARTMENT
3. SHARPNESS CONTROL
Adjust the picture quality to hard or soft during play-
back.
4. TRACKING CONTROL
Adjust to optimize the picture quality during play-
back at the 02, A12 and A24 hour speeds in the NOR-
MAL mode and at the 06, A18 and A30 hour speeds
in the HD mode.
5. SLOW TRACKING CONTROL
Adjust to optimize the picture quality in the SLOW
PLAY mode, e.g. speeds over 24 hours in the NOR-
MAL mode and over 30 hours in the HD mode.
6. V. LOCK CONTROL
Reduces vertical jitter in the still play mode.
7. PROGRAM BUTTON
Press to select one of the seven programmable func-
tions.
8. START/STOP BUTTON
Press to start or stop the programming of a pro-
grammable function. (Press once to start the pro-
gramming sequence and a second time to stop (end)
it.)
9. SET BUTTON
Press to select the specific value which is to be
changed with the UP/DOWN buttons.
10. DOWN BUTTON
Press to decrement, change or reverse to the
previous/lower value.
11. UP BUTTON
Press to increase, change or advance to the next
higher value.
12. V-POS (VERTICAL POSITION) BUTTON
Press repeatedly to control the vertical position of
the programmable display on the monitor.
13. H-POS (HORIZONTAL POSITION) BUTTON
Press repeatedly to control the horizontal position of
the programmable display on the monitor.
14. ALARM INDEX BUTTON
Press this button to cause the INDEX indicator to
light, and set the VCR to the visual search mode
(press F.FWD or REWIND during playback mode) in
this state; the start of the alarm recorded can be
located.
15. ALARM RESET BUTTON
Press to clear POWER LOSS information. When this
button is pressed, the alarm memory is cleared.
16. COUNTER RESET BUTTON
Press to clear the digital counter to “00000”.
17. REC/PLAY HOURS BUTTONS
▲
(UP):
Press to increase hours to the next
higher value.
▼
(DOWN): Press to decrease hours to the next
lower value. The tape speed will be
indicated as part of the monitor dis-
play.
18. TIMER BUTTON
Press after programming the TIMER for automatic
TIMER recording. See page 18 for TIMER program-
ming.
19. TIME DATE SEARCH BUTTON
Press to start indexing the time/date data of a cas-
sette recorded in the TIME DATE SEARCH mode.
AVR960SV-A4.E 01.6.12 6:08 PM ページ 5
