2
ENGLISH
PRECAUTIONS
Safety
• Should any solid object or liquid fall into the
cabinet, turn off the unit and have it checked by
qualified personnel before operating it any fur-
ther.
• To disconnect the power cord, pull it out by the
plug. Never pull the cord itself.
Installation
• Choose a location in which air can pass through
the ventilation holes in the bottom, top and back
of the unit to prevent it from overheating.
• Do not install the unit near heat sources such as
radiators or air ducts or in a place subject to
direct sunlight, excessive dust, mechanical
vibrations or shock.
• Do not place heavy objects or heat-generating
objects on the VCR, or the cabinet could be dam-
aged or the temperature inside the VCR could
rise, which could cause a fault.
• Never bring a magnet or magnetized object near
the VCR because it will adversely affect the per-
formance of the VCR.
• Do not install the unit in an inclined position.
The unit is designed for operation in a horizontal
position.
Operation
• Condensation
If you pour a cold liquid into a glass, water vapor
in the air will condense on the surface of the
glass.
This is the condensation of moisture.
Condensation on the head drum, one of the
most crucial parts of the VCR, will cause damage
to the tape.The VCR should not be operated for
at least 2 hours after being moved from a cold to
a hot environment to avoid condensation from
occurring on the head drum.
Cleaning
• Be careful; when the surface of the case is wiped
with a volatile agent such as benzine, alcohol,
thinner, etc., or a chemically processed cloth, the
surface finish may be degraded or its coating
may peel off.
Repacking
• It is wise to save the packing materials and box
in case you ever need to ship or store your unit.
FOR YOUR SAFETY
Power supply: AC 120V, 60 Hz only
If the unit is to be left unattended for a log period
and it is not intended to use the unit, it is rec-
ommended that the unit be completely switched
off by removing the plug.
Illustrated below is molded on the back of your
unit.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER–SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
ATTENTION
RISQUE DE CHOC ELECTRIQUE
NE PAS OUVRIR
CAUTION
This symbol warns the user that uninsulated
voltage within the unit may have sufficient
magnitude to cause electric shock. Therefore,
it is dangerous to make any kind of contact
with any inside part of this unit.
This symbol alerts the user that important
literature concerning the operation and
maintenance of this unit has been included.
Therefore, it should be read carefully in order
to avoid any problems.
WARNING:
TO PREVENT FIRE OR
ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
Warning: This equipment has been tested and
found to comply with the limits for a Class A digi-
tal device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference when the
equipment is operated in a commercial environ-
ment. This equipment generates, uses, and can
radiate radio frequency and, if not installed and
used in accordance with the instruction manual,
may cause harmful interference to radio com-
munications.
Operation of this equipment in a residential area
is likely to cause harmful interference in which
case the user will be required to correct the inter-
ference at his own expense.
CAUTION: CHANGES OR MODIFICATIONS NOT
EXPRESSLY APPROVED BY THE PARTY RESPON-
SIBLE FOR COMPLIANCE COULD VOID THE
USER’S AUTHORITY TO OPERATE THE EQUIP-
MENT.
This digital apparatus does not exceed the Class A
limits for radio noise emissions from digital ap-
paratus as set out in the Interference-causing
equipment standard entitled “Digital Apparatus”,
ICES-003 of the Department of Communications.
AVR960SV-A4.E 01.6.12 6:08 PM ページ 2
