background image

9

Installation  Instructions

AUTO-IRIS LENS CONNECTOR

All cameras within the range can be used with lenses fitted with automatic irises (either direct

drive, DC drive or video drive types). The lenses are connected to the camera via a 4-pin

square socket located at the front of the camera. The type of auto-iris lens (either video drive

or direct / DC drive) is selected by a two position switch located behind the door—see also

Auto-iris lens Selector Switch

.

SEPARATED Y/C VIDEO OUTPUT CONNECTOR

This connector provides a separated Y/C (luminance and chrominance) video output.

COMPOSITE VIDEO OUTPUT BNC CONNECTOR

To obtain a 1.0V [pk-pk] composite video signal, connect a video coaxial cable terminated with

a 75 Ohm BNC connector to the BNC socket marked VIDEO OUT. For cameras with twisted-pair

video outputs, ensure that the Video Output Type Selector switch is set to 

CV

—see 

Video

Output Type Selector switch

.

TWISTED-PAIR VIDEO OUTPUT TERMINALS 

(SUFFIX ...TP CAMERAS ONLY)

These terminals provide a composite video output signal which may be transmitted over a

twisted-pair connection to equipment furnished with a suitable receiver. Ensure that the Video

Output Type Selector switch is set to 

TP

—see 

Video Output Type Selector switch

. Remove

the blue connector to connect the twisted pair. Ensure that the connection polarity is observed

in relation to the connected twisted pair receiver.

NOTES:

Cable runs of up to 3000ft (approx. 1km) with an active receiver may be used; 1000ft (300m)

with a passive receiver.
Use unshielded twisted-pair (UTP), Category 2 or better, 24 AWG or thicker, stranded or solid

core.
For safety, do not run the unshielded twisted-pair cable alongside high-voltage carrying cables.
The twisted-pair output cannot be used at the same time as the Composite Video output .

VIDEO OUTPUT TYPE SELECTOR SWITCH CV/TP 

(SUFFIX ...TP CAMERAS ONLY)

This switch is used to set the type of video output from the camera. The camera may be set to

Composite (

CV

) or Twisted-pair (

TP

).

Chrominance

Ground

Luminance

Ground

Содержание ACC484TP

















Отзывы: