2
Installation Instructions
PRODUCT SAFETY
Installation and servicing is only to be carried out by suitably qualified and
experienced personnel.
Mains cameras contain hazardous voltages
Do not remove covers as there is a risk of injury or death by electric shock.
Mains powered cameras must be connected to earth ground.
Low voltage cameras must be powered from a UL listed class 2 power supply.
For outdoor use, an appropriate protective housing conforming to IP65 or UL50
or better must be used.
Mains cameras are not evaluated by UL.
This camera range is designed for use in general purpose CCTV applications and has no other
purpose. Only operate your camera between the temperatures of -10
O
C to +60
O
C (14
O
F to
140
O
F) for low voltage versions, and -10
O
C to +50
O
C (14
O
F to 122
O
F) for mains powered
versions. Do not operate your camera outside its specified power supply range. Cameras must
only be used in clean, dry, dust-free environments unless housed in suitable protective housings
to IP65 or better.
ELECTROMAGNETIC COMPATIBILITY (EMC)
This is a class B product. In a domestic environment this product may cause radio
interference in which case the user may be required to take adequate measures.
INTENDED PURPOSE: SECURITY AND SURVEILLANCE CCTV APPLICATIONS.
The product must be installed and maintained in accordance with good installation practice to
enable the product to function as intended and to prevent problems. Refer to Ademco Video for
installation guidance.
MANUFACTURERS DECLARATION OF CONFORMANCE
The manufacturer declares that the equipment supplied with this manual is compliant with the
essential protection requirements of the EMC directive 89/336 and the Low Voltage Directive
LVD 73/23 EEC. Conforming to the requirements of standards EN 55022 for emissions, IEC801
parts 2, 3 and 4 for immunity and EN 60950 for Electrical Equipment safety.
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE
