23
Using the Phone Panic Feature
Any on-premises touch-tone phone properly wired to the security
system can be used as a panic station, providing your installer has
programmed your security system for this feature.
To generate a phone panic alarm:
1.
Pick up a premises phone.
2.
Enter your two-digit phone code.
3.
Press the “1” key (at least six times) until you hear dial tone,
followed by silence on the line. This initiates a [
✴
] + [#] keypad
panic (or the [B] key panic) on your alarm system keyboard.
Be sure to test each phone on the premises periodically and always when new
phone wiring is installed to ensure proper operation. Notify your alarm company
before performing this test.
Содержание 4286 - Ademco Phone Module
Страница 2: ...i...
