ADE M101000-01, Инструкция по эксплуатации

Страница: 8 / 16

7 M101000-01-210323-Rev005-UM-e
Assembly finished
Weighing operation
- Align the scale by the use of the levelling feet so that all four feet are in contact with the surface,
which must be firm and even. You can also check whether the scale is fully horizontal by means
of the sprite level at the surface. The air bubble should be at the centre of the circle
- Press the ON/OFF/ZERO key to power up the scale, the display will show 88888 and will go to
0.000kg
- If the scale shows a figure other than 0.000kg with no weight applied then press the
ON/OFF/ZERO key once to Zero the scale.
- Press and Hold the ON/OFF/ZERO key to switch off the scale.
Note: The scale has a built in battery save function that will switch off the scale after a period of
inactivity, usually around 60 seconds.
Hold function
- When weighing a baby, press the HOLD key once and the scale will ‘lock’ onto the babies
weight once a stable reading has been taken.
- Press the HOLD key again to release the display.
Tare function
- The TARE key can be used to zero the weight of any unwanted item/weight, example –
protective paper towel or similar placed onto the scale, press the TARE key once and the weight
of the paper towels will be zeroed off.
- After weighing, remove the paper towels and press Tare again to cancel the tare value and
return to Zero.