ADE M101000-01, Инструкция по эксплуатации

Страница: 7 / 16

M101000-01-210323-Rev005-UM-e 6
Connecting the mains power supply
Levelling feet Connection socket
Only use the AC adapter supplied by ADE for this unit.
- Make sure that the scale is switched off before inserting the batteries or plugging in the power
adapter
- For battery operation, first insert the batteries carefully, making sure not to reverse the polarity
(+/-) .
- The battery compartment is beneath of the weighing platform
- The jack for the adapter is at the front, on the lower edge of the weighing platform
- Prior to operation, make sure that the local voltage corresponds to the voltage printed on the
power adapter.
- If the scale is not used for an extended period, remove the batteries, since they can leak,
causing damage to the scale!
Install the tray
-
Install the tray to the proper location
.
Make sure that the weighing tray is installed properly at the right position
Install the tray at the proper location and tighten the screws on both sides