ADE LWX200 Series, Руководство по эксплуатации

Страница: 18 / 24

18 LWX200-210408-Rev003-UM-en
Faults
Fault Cause Measure
The display
shows nothing.
The scale has switched off
automatically.
Switch on the scale
The scale is not connected to the
mains. Use the optional mains adapter to
connect the scale to the mains.
Weight display is
unstable.
Draughts or air movements
Close the window.
Choose a different location.
Vibrations
Avoid vibrations.
Choose a different location.
Electromagnetic fields / static
charging
Choose a different location. If
possible, switch off the interfering
device.
The weighing
result is
obviously
wrong.
The scale is not levelled
properly.
Adjust the support feet. Use the
spirit level to check the horizontal
position.
The scale is not operating in the
specified temperature range. Operate the scale only in the
permissible temperature ranges.
Electromagnetic fields / static
charging
Choose a different location. If
possible, switch off the interfering
device.
Zeroing is not
possible.
Zeroing is not possible if the
displayed weight e/- 2%
of the capacity of the scale.
In this case, switch the scale off and
on again.
Error messages
Failure Cause Measure
ERR 4
Current weight exceeds the zero
range of the scale
Unload the weighing surface and try
again.
If necessary, restart the scale.
ERR 5 Keypad fault Please contact your service partner.
ERR 6
Load cell is defective or not
connected.
Please contact your service partner.
Err 9
Weighing result unstable due to
draughts, air movement or
vibrations.
Avoid draughts, air movement and
vibrations.
Load cell is defective. Please contact your service partner.
Err 19
Current weight exceeds the
permissible range for automatic
zeroing when switched on.
Unload the weighing surface and
then restart the scale if necessary.
--oL--
Zero range or weighing capacity
exceeded
Unload the scale.
-- UL -- Underload (-20d) Switch the scale off and on again.
Storage and Transport Conditions
Keep all original packaging materials for a possible return of the scale to avoid damage in
transit. Disconnect all cables before transport and switch off the scale to avoid damage.