ADE LWX200 Series, Руководство по эксплуатации

Страница: 17 / 24

LWX200-210408-Rev003-UM-en 17
Changing automatic switch-off time
In order to change the automatic switch-off time, it is necessary to open a secure menu.
Open the menu only when you really have to. Accidental or
intentional changes to the parameters can have a significant impact
on the functionality of the scale.
To open the saved menu, press the key during the function test of the display after
switching on. The display shows “Pin”. Enter “9999” (4 times 9 key) and confirm with the
key.
The parameter menu has 17 functions (F0-F16). To navigate through these functions, press
the or key repeatedly. The display shows the name of the functions. To select a
function, press the key. To navigate through the values of this function, press the or
key repeatedly. To save your selection, press the key.
You can press the key at any time to return to the higher menu level and finally to
weighing mode.
Caution: Various functions such as F0 CAL and F14 GrA are blocked on calibrated scales. A
change leads to the loss of the calibration and is only reserved for qualified
personnel authorised by the manufacturer.
Indicator Description
F3 oFFtime
Setting the automatic switch-off time. The scale can be set to automatic
shutdown after 3/5/15 or 30 minutes or the automatic shutdown can be
deactivated. Press the key to retrieve the currently set value. Press the
or key to change the value. Press the key to select the
displayed value.
10. Care and maintenance
Cleaning
Disconnect the mains plug before cleaning the scale. Use only a damp cloth or an ordinary
disinfectant for cleaning. Do not use aggressive liquid cleaning agents, abrasive or acidic
detergents or white spirit.
Make sure that no liquid cleaning agent or water penetrates the scale and always follow the
manufacturer's instructions for use.
Faults and error messages
Below you will find a list of possible errors and faults. If necessary, these can be eliminated
with simple means. If the fault or error cannot be eliminated or other error messages occur,
please contact your service partner.