ADE KWE Series, Руководство по эксплуатации

Страница: 9 / 16

KWE-190107-Rev008-UM-en 8
3.5 Power Saving Mode / Standby (only for models with rechargeable batteries)
Please start as described in the beginning of chapter 3 to enter this menu and „SAU“ is shown
in the display.
By pressing [TARE] the Standby function can be enabled or disabled. Default is “SAU_2”.
Adjustment 0: Standby disabled. Backlight of display is always on.
Adjustment 1: Standby enabled. After 40 seconds display is showing “0”, backlight
automatically switches off. By putting something on the weighing platform
again, backlight of display will switch on again.
Adjustment 2: Standby enabled. After 40 seconds display is showing “0”, backlight
automatically switches off. By putting something on the weighing platform
again, backlight of display will switch on again. If nothing will be put on the
weighing platform within ten minutes, the scale automatically switches off.
3.6 Display Update Speed
Please start as described in the beginning of this chapter to enter this menu and „SPd“ is
shown in the display.
By pressing [TARE] the speed of the displayed weighing results can be adjusted. Default is
“SPd_1”.
Adjustment 0: Speed low
Adjustment 1: Speed high
3.7 Creep Tracking Range
Please start as described in the beginning of chapter 3 to enter this menu and „drl_“ is shown in
the display.
There can be chosen between 5 adjustments (0 – 4) by pressing [TARE] again and again.
The higher the value the higher tracking range. Default is “drl_1”.