ADE ESW10 Series, Руководство по эксплуатации

Страница: 8 / 18

7 ESW10-200206-Rev007-UM-en
Counting programme
If containers are used, they must be tared beforehand in weighing mode.
Place the reference piece count of the pieces to be counted on the scale.
While the scale is displaying the weight, pressing the key activates the counting
programme, at which point the scale displays “P 10” for a sample piece count of 10. In addition,
the display shows “pcs”.
You can change this piece count by pressing the key. The display shows 10, 20, 50, 100,
200 and then returns to 10 again each time it is pressed.
Press the key to save when the number of pieces on the scale matches the number
displayed.
If you now add more pieces, the display shows the number in pieces (pcs).
Press the key to switch between the piece count, piece weight and total weight.
Press the key to return to normal weighing mode.
Weight control
A control target weight or a control target weight range can be set on the scale. A beep sounds
when it is reached or exceeded.
The memory can be preset for a maximum and a minimum value.
Preliminary remarks
Enter the control target weight range
Set the control target weight range by saving both a maximum and a minimum value.
Take into account that there must be two different values where the maximum value must be
higher than the minimum value.
Enter the control target weight
Set the control target weight by saving the same value for the maximum and minimum values.
Control mode 2
The scale checks whether the placed weight is within the limit values entered in the control target
weight range or corresponds to the control target weight.
If this is the case, the display shows “OK” and a beep sounds as long as the resulting weight is
within these limits or corresponds to the control target weight.
The scale checks whether the placed weight is outside the entered limit values of the control
target weight range or does
not match the control target weight.
If this is the case, the display shows “OK” and a beep sounds as long as the resulting weight is
outside these limit values or does not match the control target weight.