ADE ESW10 Series, Руководство по эксплуатации

Страница: 11 / 18

ESW10-200206-Rev007-UM-en 10
11. Menu settings
Function
Sub-
function
Descriptions Display
F0 H-L
SEt Lo Sets the lower limit value. 000.000
SEt HI Sets the upper limit value. 000.000
F1 toL
to CLr
Deletes the memory content of additional weighings without printing
the result.
to P-C Prints the memory content of weighings and then deletes them.
to Prt
Prints the memory content of additional weighings without deleting
them afterwards.
F2 u nt
Sets the weight units.
Toggles between kg and lb.
F3 tI SEt dA
Sets the date function.
The display shows the last date or 00.01.01. Enter the new date.
F4 off
C loC K
Starts the clock function: CLK off:
Turns the clock function off: CLK on:
After 5 minutes the scale display returns to the clock mode and
shows the time.
CLK off
bL
Sets the backlight:
EL on: Backlight activated
EL Au: Backlight automatic
EL off: Backlight disabled
EL Au
bEEP
Sets the beep function:
Control mode 2
Control mode 3
No beep
F5 Prt
Setting the RS232 interface for printing:
P Prt: Only by pressing the “PRINT” key
P Cont: If you want to print continuously
Sei re: RS232 connection when removing the display
After setting the print mode, the display shows
“b xxx”
to set
the transmission rate.
To change the rate (600/1200/2400/4800/9600 bps), press the
“TARE” key.
The display shows
“PR X”
for setting the time and data format.
Then the display shows
“LAB X”
, the gross and the print
format.
Then the display shows the printer type:
TY-TP: mini ticket printer
TY711: A711 label printer
LP-50: LP-50 label printer
After you have made your selection, press the “Zero” key to save.
For the printer format, see table one/two in section 12.
P Prt
If kilogrammes set on the scale differ from the unit specification, the weight in counting mode is
nevertheless specified in kilogrammes.