90612-30-180320-Rev009-UM-en
6
-
Put the object to be weighed on the platform.
-
The weight of object can be read from the display. In display NET appears.
If the object to be tared remains always the same you may continue weighing another object.
The scale will tare automatically the stored value and will show only the net weight of the
individually weighed object. In case the scale is shut off automatically (e.g. in battery operating
mode) the stored value is cleared. If the value to be tared should be changed during operation
of the scale, remove all objects from the scale. Then press
again to return to normal
weighing mode.
Unit function
By using
you may select the weighing mode.
Setting of backlight and Unit function
The user has the possibility to activate or deactivate the backlight.
Activated backlight makes it easier to read the weighing results from the display, but it also
needs more power consumption.
For setting the backlight parameter press same time buttons
and
.
Display shows “inC” (graduation). In this parameter you must not make any changes, because
otherwise it’ll change metrological parameter which could lead to wrong measuring results.
To pass to the next parameter just press
.
Display shows “EL” for setting the backlight.
Indication in Display Option
EL Au
Backlight on, only if weighing platform is loaded.
EL Off
Backlight is deactivated and permanently out.
EL On
Backlight is activated and permanently on.
By pressing
you can change between the different indications.
To confirm your choice press
.
Now display shows “A2”. In this parameter you must not make any changes, because
otherwise it’ll change metrological parameter which could lead to wrong measuring results.
To pass to the next parameter just press
.
Display now shows “Ut” for setting the units.
In sequence it will be shown units g (grams), t (Tola), lb (pound), and oz (ounce), which can be
individually activated or deactivated.
If a unit, e. g. g for grams, is shown, press
to activate/deactivate unit. If display shows
“on”, unit is activated. If display shows “off”, unit is deactivated.
