5
90612-30-180320-Rev009-UM-en
Use of the scale
Switch on the scale
Remove all weights from the platform.
Switch on the scale. On/Off switch is placed underneath the scale on the right hand side. After
switch-on the scale is running an automatic functions test ending with showing “0.000” in the
display. The scale is now ready for weighing.
After changing the location of the scale especially with temperature fluctuations please wait for
15 minutes after switch-on to warm up inside the scale. This helps stabilizing measuring results
of weighing.
Switch off the scale
Switch off the scale with switch, which is on the right hand side underneath the scale.
Zeroing
By using the
key eventual irregularities occurred after start up the scale can be
compensated by setting the display back to zero for all subsequent weighing procedures.
Weighing
Place the weighing object on the platform and the display will show the weight.
A stable value will be shown on the left of the display with symbol
.
If there’s an underload display shows „------“ and an acoustic warning signal appears. Remove
all objects from the weighing platform, adjust it and restart weighing process.
If there’s an overload display shows „--OL--“. In this case remove all objects to avoid irreparable
damages.
If display of the scale shows a value without objects on the platform, press
to set zero
manually.
Tare Function
This function enables the user to weigh objects together with others (e.g. container, foil or paper
cloth) without the additional weight influencing the weighing result.
-
Switch on the scale.
-
If necessary use the manual zero function by pressing
if necessary. The ZERO
indication appears on display.
-
Place the object (e.g. container, foil or paper cloth) on the tray.
-
Press
key to come back to zero. Display now shows `0.000´ and NET and ZERO
symbol will appear.