AddSecure Tor V, Руководство по установке

Страница: 5 / 20

AddSecure Tor V, PDK-11606 5
2 PACKAGE CONTENTS
Tor V alarm transmitter in a plastic encasement
 This user manual
 Commissioning instructions (47IN0039)

Installation manual – Removal detector (47IN0051)

Tor V (alarm transmitter)
 Removal detector
 Internal antenna

Ethernet cable (shielded)

SIM card
 Sticker to mount on the fire alarm (EN 54-21:2006)
 Labels to mark the connections and indicators on the alarm transmitter

Screws and plugs for installation

External antenna for 4G (GPRS/EDGE/4G)
 Option: AC/DC adapter 230V/24V
.
3 CONDITIONS
3.1
Fire alarm installation (EN 54-21:2006)

The service profile of the alarm transmitter is to meet the requirements set forth in
SBF 110:8 (EN 54-21:2006).
 The alarm transmitter is to be mounted and connected so that all requirements in SBF
110:8 (EN 54-21:2006) are met.

The pin inputs and relays are connected to meet the requirements set forth in SBF
110:8 (EN 54-21:2006). Use inputs normally closed or with a resistor to detect failure.
 The alarm transmitter is to be mounted and voltage supplied from the control panel.
 Access to voltage supply from the control panel, with 2A fuses.

Externally mounted antenna with satisfactory signal strength for mobile data
communication.
 Marking the outside of the alarm transmitter’s encasement with the included sticker.
 Follow the instructions in the following sections: 4.1, 6.1, 6.5 and 7
3.2 Alarm installation (EN 50136/SSF 114)
For security class 2, the following apply:
 Tor V in a plastic encasement without a battery backup but with a mounted removal
detector.

The service profile of the alarm transmitter is to meet the requirements set forth in
SSF 114:2/EN 50136.
 The pin inputs and relays are connected to meet the requirements set forth in SSF
114:2/EN 50136. Use inputs normally closed or with a resistor to detect failure.

The alarm transmitter is to be mounted and connected so that all requirements set
forth in SSF 114:2/EN 50136 are met.
 Access to voltage supply of +12V to +30V with battery backup, with 2A fuses for 12V.

Follow the instructions in the following section: 6.2