ADDER SMART View PRO SV12PRO, Инструкция по установке и использованию

Страница: 15 / 44

SmartView Installation and Use Page 14
For example: to set hotkey option 2 type the following at the 'C' prompt
(at SmartView 'C' prompt)
H H 2 2 f
f
To exit configure mode type:
E E f
f
2.6 Summary of SmartView configuration options
Full details of each of the configuration options and their uses are given in section 4.
B1
- screen saver disabled (default)
B2 - Blank screen after 1 minute of inactivity
B3 - Blank screen after 2 minutes of inactivity
B4 - Blank screen after 4 minutes of inactivity
B5
- Blank screen after 8 minutes of inactivity
B6 - Blank screen after 12 minutes of inactivity
B7 - Blank screen after 16 minutes of inactivity
B8
- Blank screen after 20 minutes of inactivity
D1 - Menu appears with magenta / blue background and green highlight (default)
D2
- Menu appears with red / blue background and green highlight
D3 - Menu appears with blue / black background and light blue highlight
D4 - Confirmation message remains on screen for standard time period (default)
D5 - Confirmation message remains on screen for short time period
D6
- Confirmation message remains on screen for extended time period
L1 - SmartView locks on to active ports only during autoscanning (default)
L2
- SmartView locks on to every port during autoscanning
L3 - SmartView powers on in autoscan mode and locks on to active ports only
L4 - SmartView powers on in autoscan mode and locks on to all ports
L7 - SmartView cascade query code = AD (default)
L8 – SmartView cascade query code = EF