background image



























2

1

2

SPK

KVM

COMPUTER

KVM SPK USB1 USB2

MODE

www.adder.com

Introduction

Thank you for choosing a member of the AdderView 
Pro (AV4PRO) family of professional switches from 
Adder Technology. There are four versions of the 
AV4PRO-DVI, each of which allows a single operator 
to control up to four computer systems and share 
peripherals among them in a very flexible manner. 
The AV4PRO-DVI can support one video head per 
channel, whereas the slightly larger AV4PRO-DVI-DUAL, 
AV4PRO-DVI-TRIPLE and AV4PRO-DVI-QUAD units 
support two, three and four video heads per channel, 
respectively. 

Thanks to our high quality, efficient switching 
technology, each video head can support dual link 
digital video at up to 450Mpixels per second. In 
addition to the impressive video performance, these 
units offer more than just straight switching between 
four systems. The KVM, speakers and two separate USB 
devices attached to the AV4PRO-DVI units can either  
be switched in unison, as normal, or you can mix your 
peripherals between any of the systems to suit your 
current tasks. For instance, you could be creating emails 

on one system, listening to a soundtrack from another 
while a third is sending documents to your printer 
and a fourth performing another task with a different 
USB peripheral. The AV4PRO-DVI front panels make 
it straightforward to control which peripherals should 
connect to each system. 
The AV4PRO-DVI units feature 

True Emulation

 which 

ensures that the full characteristics of the connected 
keyboard and mouse are passed to every system. 

Digital and analogue video

The AV4PRO-DVI units use DVI-I 
(Integrated) connectors throughout so 
that DVI digital and/or VGA analogue 
video may be used (the latter requires 
the use of suitable adapter cables). 

Multiple switching

The attached peripheral devices can be 
switched collectively to any computer system, 
or can be linked to separate systems to 
achieve multiple tasks in parallel. Multiple 
switching can be controlled from the on-
screen menu or using the front panel buttons.        

True Emulation

Earlier USB KVM switches relied upon 
standard keyboard and mouse templates 
to inform each computer system how to 
deal with the connected peripherals. The 
AV4PRO-DVI range succeeds in harvesting 
the true identities of the connected keyboard 
and mouse and presents those ‘real’ profiles 
concurrently to every system. Thus, specialist 
keyboards and mice can be fully supported.  

Multiscreen versions

The AV4PRO-DVI range includes 
separate models to support one, two, 
three  or  four  video  heads  per  channel.          

USB Remote wakeup

The USB Remote Wakeup feature is fully 
supported. Any connected computer can go 
into sleep mode and be awakened (when its 
channel is selected) as soon as you press a 
key or move the mouse. The computer and 
peripherals must support the USB Remote 
Wakeup feature.         

Intelligent display information

The AV4PRO-DVI units use our 

EDID 

Emulation

 feature to ensure that 

all computers are supplied with 
the correct information about each 
connected video display. 

Содержание AV4PRO-DVI































Отзывы: