ADDER AdderLink XDIP, Руководство пользователя

Страница: 15 / 63

14
INST
ALLA
TION
CONFIGURA
TION
OPERA
TION
FUR
THER
INFORMA
TION
INDEX
RECEIVER TRANSMITTER
SETUP - Receiver or Transmitter?
Is this node a receiver or transmitter? After restoring to defaults
you can change this in the future.
Note: When using the configuration wizard to create a full installation, it is quicker and more
efficient to configure all transmitters via a node that will become a receiver, rather than
configuring each of the intended transmitters separately.
6 Choose the required setting:
• If you are setting up a mixture of receiver(s) and transmitter(s), click
the RECEIVER option.
• If you are creating a transmitter to add into an existing installation, click
the TRANSMITTER option. See page 17.
SETUP - Basic Information
Enter the names, descriptions and admin password for this
receiver.
Receiver Name
Receiver Description
Computer Name
Computer Description
New Admin Password
Confirm Admin Password
Description
Local Computer
Description
Password for Node Configuration
Password for Node Configuration
Receiver 1
Cancel OK
If you chose the RECEIVER option, you will now be given the opportunity to enter
details for the node to which your console peripherals are currently connected:
You will now be given a choice of turning this Start of Life node into either a receiver
or a transmitter:
7 Enter the details for this receiver, including the password (required to administer the
configuration details). The
Computer Name/Description fields refer to a local computer
connected directly to this receiver, if present.
Note: Passwords can be left blank, but this is not recommended.
8 Click OK.
INITIAL CONFIGURATION (continued)
continued