ADDER AdderLink Infinity Manager Скачать руководство пользователя страница 52

51

INST

ALLA

TION

CONFIGURA

TION

OPERA

TION

FUR

TH

e

R

INFORMA

TION

INDEX

get_devices (continued)

- for each device:
   - attribute: item (e.g. 17th device)
   - d_id (device id)
   - d_mac_address (device MAC address)
   - d_name (device name)
   - d_description (device description)
   - d_location (device location)
   - d_online (0 = offline, 1 = online, 2 = rebooting, 3 = factory_resetting, 

 

 

4 = firmware_upgrading, 6 = running backup firmware)

   - d_type (rx, tx)
   - d_version (1 = Infinity ALIF 1000, 2 = Infinity Dual ALIF 2000/2002/2112)
   - d_variant (‘’, ‘b’ = ALIF 2002, ‘v’ = ALIF 2112)
   - d_ip_address
   - d_configured (0 = no, 1 = yes)
   - d_valid_firmware (0 = no, 1 = yes)
   - d_valid_backup_firmware (0 = no, 1 = yes)
   - d_firmware (firmware version, e.g. 2.5.17879)
   - d_backup_firmware (backup firmware version)
   - d_date_added (Date device added to A.I.M. network 

 

 

e.g. 2012-07-13 22:17:22)

The following property is only returned for transmitters:
   - count_transmitter_channels (the number of channels containing this  

 

 

transmitter)
The following properties are only returned for receivers:
   - con_start_time (start time of last connection e.g. 2012-09-07 13:33:17)
   - con_end_time (empty if connection still active, else date/time the connection  

 

was ended e.g. 2012-09-07 13:33:17)
   - con_exclusive (0/1 - if the last connection is/was in exclusive mode)
   - con_control (0/1 - if the last connection has/had USB enabled)
   - u_username (username of the user who initiated the last connection)
   - u_id (user ID of the user who initiated the last connection)
   - c_name (name of the channel last connected)
   - count_receiver_groups (the number of receiver groups this receiver is a part of)
   - count_users (the number of users who have access to this receiver)

Examples

Input:

/api/?v=2&method=get_devices&token=xxxxx
/api/?v=2&method=get_devices&device_type=tx&page=2&results_per_
page=3&token=xxxxx

Output:

<api_response>
   <version>2</version>
   <timestamp>2012-09-12 14:56:11</timestamp>
   <success>1</success>
   <page>2</page>
   <results_per_page>3</results_per_page>
   <total_devices>12</total_devices>
   <count_devices>3</count_devices>

   <devices>

      <device item=”4”>
         <d_id>170</d_id>
         <d_mac_address>00:0F:58:01:6E:3D</d_mac_address>
         <d_name>RX 123</d_name>
         <d_online>1</d_online>
         <d_type>rx</d_type>
         <d_version>2</d_version>
         <d_variant></d_variant>
         <d_ip_address>10.10.10.66</d_ip_address>
         <d_description></d_description>
         <d_location>Server Rack 3</d_location>
         <d_configured>1</d_configured>
         <d_valid_firmware>1</d_valid_firmware>
         <d_valid_backup_firmware>1</d_valid_backup_firmware>
         <d_firmware>2.3.16682</d_firmware>
         <d_backup_firmware>2.3.16682</d_backup_firmware>
         <d_date_added>2012-07-14 01:37:07</d_date_added>
         <con_exclusive>0</con_exclusive>

continued

Содержание AdderLink Infinity Manager






























































Отзывы: