29
INST
ALLA
TION
CONFIGURA
TION
OPERA
TION
FUR
THER
INFORMA
TION
INDEX
TX Statistics
TX Firmware Upgrade
TX Reboot
Enable collection of bandwidth statistics
ALIF units can record data transfer statistics from the System port and plot them on a graph for
troubleshooting and optimization purposes. When you enable this option, you will first be presented with a pop
up from which you can choose which aspects you would like to graph: Data throughput, various packet rates
and/or frame rates.
Submit
Click this button after ticking the above checkbox to plot the chosen statistics on a pop up graph.
Upgrade
Use this page to upgrade the main or backup firmware image on the unit. Please see the section
Performing an
upgrade
for details.
Reboot
Use this page to perform a reboot or a factory reset. Please see the section
Manual factory reset
for details.
To get here
1
Connect your computer to a port
on the front panel.
2 Run a web browser and enter the IP address of the Management (ALIF dual only) or System port used:
http://192.168.1.42
(management port) or
http://169.254.1.33
(system port)
If the address is unknown, perform a
manual factory reset
.
3 Click either the
Statistics
,
Firmware Upgrade
or
Reboot
links, as appropriate.